Scroll to top
Floortec 2K-Purolid F 878

Floortec 2K-Purolid F 878

 
Two-component, colored sealer on a polyurethane base for floor surfaces that are open to traffic both in interior and exterior areas. Can be used on mineral substrates, as a top seal for renovating rigid 2K coatings and as a colored sealer for old Luxury Vinyl Tiles (LVT). Efficient renovations, thanks to rapid drying times – intermediate and top coats can be applied on the same day.
 


  • Silk matt
  • Water-dilutable
  • Very low odor
  • Rapid curing
  • Very good flow properties for smooth surfaces
  • Very good covering capacity
  • Excellent cleanability
  • Can be combined with Floortec Decochips 843
  • Highly resistant to mechanical and chemical stresses
  • Disinfectant-resistant in accordance with test verification
  • Can be decontaminated in accordance with DIN 25415, according to test verification
  • Tested as certified slip-resistant coating in the classes R9 and R11, according to the test certificate

Drying (+20°C, 65 % relative humidity)

Dust dry after ca. 2 hours, coatable after 4-16 hours.

Consumption

Approx. 90 - 110 ml/m² per layer

Colors

Scala Name
72.03.12 RAL 7035 Light gray
84.03.24 RAL 7023 Concrete gray

It is possible to mix more color shades using the Brillux Color System and as special order. Further color designs are possible with Floortec Decochips 843.

Ordering Information

Standard:
878 / 3.5 l / PU 1

Color System:
878 / 3.5 l / PU 1