Mineral wall design Creativ Algantico 70 – Version Lusso 6c06

For particularly fine-pored surfaces with a subtle effect, the Version Lusso 6c06 is the perfect choice. For this effect, Creativ Algantico 70 is applied with a texturing roller. The fine sanding creates smooth surfaces with slight porosity. Finally, filling and compacting is then performed again to achieve the typical iridescent matt-gloss effect. This wall design harmonizes perfectly with modern, linear architecture.

Step 1

Apply Creativ Algantico 70 uniformly in medium layer thickness (approx. 300 g/m²).

Step 2

The fresh material is textured in a criss-cross pattern with the Foamed Texturing Roller 1104.

Step 3

After a short waiting period, smooth the surface profile with the Metallico Effect Trowel 1124.

Step 4

Once dry, the surface is ground mechanically. The subsequent fine sanding by hand creates an iridescent matt gloss.

Step 5

A protective coating with Creativ Decorative Wax 49 can be optionally performed.