Metallic wall design Creativ Metallico 76 – Metal effect technique Cambiato 4c07
With this application technique, Creativ Metallico 76 is applied on a smooth substrate and smoothed with a Deco Wiper in short, criss-cross strokes. The light brush strokes are retained in the finished technique and create a subtly textured surface with iridescent metallic shine. For a slightly molded effect, the application is performed in two decorating steps.
Creativ Metallico 76 is applied with the Microfiber Paint Roller 1221 to a color-coordinated substrate.
For aftertreatment of the fresh surface, texturing is performed in a different direction with the Microfiber Paint Roller 1221.
The surface is distributed and smoothed uniformly with the Surface Block Brush Extra 1210.
After drying, the second material coat is applied with the Microfiber Paint Roller 1221 in a different direction.
The second coat of material is also distributed and smoothed uniformly with the Surface Block Brush Extra 1210. This gives the surface the typical iridescent shine.
