Scroll to top
ETICS Impact Anchor H1 eco 3856

ETICS Impact Anchor H1 eco 3856

 
For statically-relevant anchoring of insulation boards in the Brillux ETIC systems. Can also be used for additional constructive mounting of ETICS hard foam insulation boards in the adhesion method in the EPS Prime and EPS Qju systems.
 


  • approved impact washer anchor with galvanized nails and plastic-molded nail head
  • with a stable (break-proof) steel nail
  • low anchoring depth with minimal drilling hole depth
  • more efficient use of anchors
  • faster mounting due to preassembled anchor sleeve and nail
  • reduced thermal bridge impact due to plastic sheath at the top end of the nail
  • length specification on the anchor washer enables visual check of the anchor length following successful mounting
  • anchor lengths: 95, 115, 135, 155, 175, 195, 215, 235, 255, 275 and 295 mm

files

data sheets



Ordering Information

3856 / 95 mm / PU 100
3856 / 115 mm / PU 100
3856 / 135 mm / PU 100
3856 / 155 mm / PU 100
3856 / 175 mm / PU 100
3856 / 195 mm / PU 100
3856 / 215 mm / PU 100
3856 / 235 mm / PU 100
3856 / 255 mm / PU 100
3856 / 275 mm / PU 100
3856 / 295 mm / PU 100