Logo Brillux

Floortec system for balconies

Summer, sun, balcony – please make it last!

As a place to retreat or an extended living room: a balcony is ideal for relaxing outdoors or grilling with friends. Because balconies, loggias and pergolas are often directly exposed to the weather, they are some of the most heavily stressed parts of buildings. Enormous temperature differences from +70°C to -30°C place high demands on the coatings, especially in terms of protection against leaks, crack-bridging and water drainage. They also have to withstand mechanical stress from, for example, furniture and flowerpots. And of course, they also need to look nice and well looked after. That’s quite a lot at once. But no problem at all: our Floortec balcony coatings offer the right solutions for all requirements.

Person rolling a roller across the floor

Flexible balcony coating system: tailor-made protective coating with Brillux Floortec

Floortec balcony coatings offer flexible combination options that enable the right build-up for every requirement. What they all have in common is an almost jointless surface and low installation height and weight.

Differences exist in terms of the speed of application, the visual requirements, design freedom, protection against leaks and durability. And that’s exactly what makes the Brillux Floortec system so flexible.

An additional benefit: Brillux balcony coatings are particularly low odor, allowing the work to be carried out without disturbing residents or users.

Cookies must be enabled

We host videos on YouTube. By playing the video, you consent to the use of functional cookies and to data processing by YouTube.

Floortec balcony coatings are approved according to DIN 18531 and tested to EAD 030350-00-0402

The waterproofing of roofs, balconies and pergolas is regulated in DIN 18531. Part 5 covers the requirements as well as the principles of planning and implementation. A basic requirement states that a balcony coating with liquid plastics must comply with EAD 030350-00-0402.

The system build-ups marked with the “EAD” symbol here meet the strict demands of the guideline in terms of durability and suitability of the waterproofing for use on balconies, loggias and pergolas.

ETAG approval logo

Efficient application and maximum protection against leaks are no contradiction in terms for Brillux Floortec

A particular strength of Floortec balcony coatings is the 2K-Sealcon Top 832 system component, as waterproofing is achieved without the labor-intensive incorporation of a fleece reinforcement. In addition, 2K-Sealcon Top 832 not only provides waterproofing, but also forms a usable surface. 2K-Sealcon Top 832 is applied as a liquid plastic with a film thickness of 2–2.5 mm. It dries very quickly and forms a highly functional seal. The coating can be walked on after just six hours – at the latest after drying overnight. A separate wear layer and the absence of a fleece reinforcement enable particularly efficient, easy use with maximum protection against leaks. Even in connecting and detail areas, the coating offers a very high level of protection with up to 220% elongation at tear.

Priming balcony floor with a roller
1st step

Priming with 2K-Basecon 825

Man applying Floortec with a filler knife
2nd step

Application of the vapor pressure equalization as self-leveling filler

Man applying coating to floor with a filler knife
3rd step

Waterproofing with 2K-Sealcon Top 832 that complies with EAD...

Man scattering Colograins on floor covering
4th step

...and deaerate

Sealing with a roller
5th step

Optionally scatter Decochips 843 and seal with Topcon T 834

We give you five: the system build-ups of Floortec balcony coatings

From quick, practical renovations through to balcony waterproofing in accordance with EAD – with the Brillux Floortec balcony coatings, we always offer the ideal system build-up for a wide range of applications. 

The robust 2K sealer - resistant and practical

The 2K-Purolid sealer is suitable for mineral balcony tiles in combination with the tried-and-tested build-up of prime coat and self-leveling filler. 2K-Purolid can also be used on compatible 2K coatings.

Diagram of robust 2K sealer

The strengths and properties of 2K-PU sealer at a glance

  • High durability
  • Very good mechanical resistance
  • Film thickness of total build-up approx. 2 mm
  • Takes 2 days (+20°C and 60% relative humidity)
  • Slip resistance class: R9–R11, depending on the selection of the top coat

  • Decochips 843 with silk matt top seal: 2K-Purolid T 876, silk matt (slip resistance class R10)
  • Decochips 843 with silk gloss top seal: 2K-Purolid T 877, silk gloss (slip resistance class R9)
  • Colorless top seal with 2K-Purolid T 876, silk matt and Safe Step 841 (slip resistance class R10)
  • Colorless top seal with 2K-Purolid T 877, silk gloss and Safe Step 841 (slip resistance class R10)

Graphic of simple 1K-PU coating build-up

The simple 1K-PU coating – flexible and efficient

The 1K-PU coating with Topcon F 828 offers a practical solution for balcony coating. In combination with a prime coat and self-leveling filler, it’s ideal for mineral balcony tiles. Decochips 843 can optionally be used to create an individual surface design.

The strengths and properties of 1K-PU floor coating at a glance

  • Crack-bridging
  • Flexible at low temperatures
  • Good mechanical resistance
  • Film thickness of approx. 2.5 mm
  • Takes 1–2 days (+20°C and 60% relative humidity)

Fast surface waterproofing - efficient and resilient

The coating build-up with 2K-Sealcon Top 832 allows for quick and practical surface waterproofing of balconies, loggias and pergolas with a low film thickness of 2 mm. Particularly efficient: the coating provides both waterproofing and a wear layer. Optionally, Decochips 843 can be used to create an individual surface design.

Graphic of fast surface sealing build-up

The advantages and properties at a glance

  • Balcony waterproofing and wear layer in one
  • Can be used without a fleece insert; application only with notch pattern type 48 at a film thickness of 2 mm
  • High crack-bridging (elongation at tear approx. 220%)
  • Good mechanical resistance
  • Film thickness of total build-up approx. 4.0 mm
  • Fast application – completed in just 2 days
The tested 2K waterproofing coating build-up

The tested 2K waterproofing - standard-compliant and reliable

The coating build-up with 2K-Sealcon Top 832 offers tested waterproofing according to EAD 030350-00-0402 for balconies, loggias and pergolas. The coating is applied in a standardized film thickness of 2.5 mm, with no fleece insert required. For an individual look, the surface can be optionally designed using Decochips 843.

The advantages and properties at a glance

  • Balcony waterproofing and wear layer in one
  • Can be used without a fleece insert; application only with MT S2 at a film thickness of 2.5 mm
  • Very good crack-bridging (elongation at break approx. 220%)
  • Good mechanical resistance
  • Film thickness of total build-up approx. 4.5 mm
  • Fast application – completed in just 2 days

Visual refreshment for a new look and increased service life

Topcon F 828 is also suitable as a renovation coating on unsightly old coatings. This is provided that the old coating is intact and is
based on 2K-PUR or PMMA. The coating build-up requires thorough preparation of the old coating and the use of the Pricon 831 system prime coat.

Visual refreshment of coating build-up

The advantages and properties at a glance

  • Crack-bridging
  • Flexible at low temperatures
  • Good mechanical resistance
  • Film thickness approx. 0.4 – 0.5 mm
  • One-day renovation possible
Floor with water film

Cut and dried: the right balcony drainage

Standing water? Not with us. Find out how to properly drain balconies here.