Our base insulation boards ensure efficient insulation of the base and ground level area to approximately 30 cm below the surface. They correspond to building material class “schwer entflammbar B1” (flame-retardant) and are attached by the adhesion method. With an insulation value of up to 0.032 W/(m*K) and layer thicknesses of up to 300 mm, they offer excellent performance. We also offer a wide range of top coats, flat-facing bricks and ceramic coverings
Base insulation
Eliminating energy weak points
Contractors are familiar with the problem: energy can be lost in the area of the outer wall close to the ground. The heat finds its way outside via these thermal bridges. This means more heating and higher costs for customers. The solution: base insulation – and the components to match.
Efficient from the ground up
ETICS Base Joint Profile 3815:
Exactly the right profile for recessed bases
Aluminum base profiles are usually the first choice in combination with ETIC systems. However, with recessed base insulation in particular, these can create thermal bridges. That’s why we developed the ETICS Base Joint Profile 3815 – for quick and easy forming of recessed base surfaces without thermal bridges. And the ETICS Base Joint Profile 3815 is quick and easy to apply: the facade surface is insulated first and then the base surface. This creates an impact-protected, precise and clean transition between facade and base insulation without thermal bridge impact.
